Epoxy Garage Floor Coating application instructions

Do I need to purchase the clear top coat to get the high gloss finish? NO! Both base and top coats have equal gloss levels however when you apply an additional clear coat the light will reflect on a smoother surface and will therefore look glossier.

Epoxy Garage Floor Coating application instructions

Please click on

at the right to start the detail instructional video that shows you step by step how to apply Epoxy Coat to your garage floor. This Video is approximately 10 minutes long. We hope you find the video useful and remember if you have any additional questions contact epoxy coat and we will answer all your questions!

1. SURFACE PREPARATION
For extremely soiled oily areas: use one part degreaser and one part water. Use a scrub brush and rinse.

4. FLAKE APPLICATION
Disperse flakes over wet surface for mosaic surface. Repeat Steps 3 and 4 until entire floor is completed. Add non-slip aluminum-oxide as desired.

2. SPRAY & RINSE
Spray entire area with 1 part prep solution to 4 parts water mix. EPOXY-COAT may be applied 6 hours after surface preparation. Shot blasting or diamond grinding acceptable in PLACE of prep solution.

5. DRY TIME & MAINTENANCE
Your new EPOXY-COAT floor is ready for light foot traffic in as little as 18 hours; heavy traffic in 24 hours. Easily cleaned with a mild detergent.

3. MIX & APPLY
Mix the enclosed contents in this bucket (2 parts “A” to 1 part “B”) for approximately 3 minutes. Cut in perimeter of floor with cut-in brush and apply EPOXY-COAT.

BUY DIRECT FROM THE MANUFACTURER!

Our affiliate companies can service all your floor application and surface preparation needs!
Call today for assistance.

© 2008 Epoxy-Coat floor coating - Epoxy Garage Floor Coating

Epoxy Floor - Concrete Floor Paint - Garage Flooring

If you need an Epoxy Floor or Concrete Floor Paint or maybe Garage Flooring, you have come to the right website.