Epoxy-Coat™ Bulk Orders: Full Kit(500SF)
5-10 Kits: $249.95 per kit $.05 per mil.
11-20 Kits: $239.95 per kit $.049 per mil.
21 or more Kits: $219.95 per kit $.043 per mil.
55 gallon Epoxy-Coat drum kit: clear $.155 sq ft.
55 gallon Epoxy-Coat drum kit: standard colors $.195 sq ft.
55 gallon Epoxy (Aliphatic) drum kit: clear $.143 sq ft.
Kits Include
Epoxy-Coat™: Full Kit(500SF)
2 Gallons Part A, 1 Gallon Part B, Epoxy Clean & Prep Solution, Roller Cover, Cut-In Chip Brush, Rubber Gloves, Squeegee, Mechanical Mixer, Disposable 6, 2 & 1-Gallon Bucket, Aluminum Oxide (Non-slip), Color Chips (Included, but optional), Measuring Stick, and a Detailed Instruction Booklet and DVD. TECH SUPPORT IS AVAILABLE 365 DAYS A YEAR!
Epoxy-Coat™: Half Kit(250SF)
1 Gallon Part A, 1/2 Gallon Part B, Epoxy Clean & Prep Solution, Roller Cover, Cut-In Chip Brush, Rubber Gloves, Squeegee, Mechanical Mixer, Disposable 6, 2 & 1-Gallon Bucket, Aluminum Oxide (Non-slip), Color Chips (Included, but optional), Measuring Stick, a Detailed Instruction Booklet, Instructional DVD. TECH SUPPORT IS AVAILABLE 365 DAYS A YEAR!
U-Coat it:
Applicator tools, instructional video, applicator guide, and all the coating materials necessary for application.
Epoxyguard:
2 Gal. Part A resin, 1 Gal. Part B Hardener, 1 Gal. Clear topcoat, mixing bucket, mixing wand, roller cover, gloves, instructional guide, squeegee, prep solution, decorative fleck, trim brush, safety glasses, aluminum oxide, instructional DVD.
Muscle Gloss:
Part A, Part B.
Original Color Chip Company:
1 Gal. Etch & Clean, 1 Gal. part "A" resin, 1 Gal. part "B" hardener, color chips, 1.5 Gal Topcoat.
Rustoleum:
1 Gal. Part "A", 1 Qt. Part "B", flake, citric acid powder, instructional DVD.
Terms / Definitions
Heat Deflection Temperature is defined as the temperature at which a polymer sample deforms under a specified load.
Tensile Strength is define as the resistance of a material to a force tending to tear it apart, measured as the maximum tension the material can withstand without tearing.
Compressive Strength is defined as the amount of resistance of a material to fracture under compression.
Izod Impact is defined as the resistance of a material to the impact of a suddenly applied force.
Taber Abrasion is defined as the resistance to wear.
*NOTE: All 100% solid epoxy is figured at 1604 SF per Gallon per mil.
The information provided herein was believed by Epoxy-Coat to be accurate at the time of preparation or prepared from sources believe to be reliable, but it is the responsibility of the user to investigate and use other pertinent sources of information.
